FAQ's: Titan Head Gasket Sealers and Oil Stop Leaks

Answer: The best way to diagnose a blown head gasket is to identify key symptoms… - Engine overheating, smoke or steam - External coolant leaks around cylinder head - Depleted coolant w/ no visual trace of leakage - Bubbles in radiator or overflow - Milky coloration/film in oil - Heater stops working - Engine hard to start - Steam from exhaust

Answer: This condition can be repaired with our Titan products. You will need to purchase both the head gasket repair kit for your vehicle and an application of our Oil Stop-Leak product… Always perform the coolant-side repair first. Then, if the oil is contaminated with coolant/water change the engine oil and simply add our Hi-Strength Oil Stop-Leak product to the new oil. It will repair the oil-side seals as you drive the vehicle. Typically within as little as 75 miles…

Titan repairs can be easily completed by almost anyone. See overview below… First, add Titan Head Gasket Sealer to a clean coolant system. Next, allow engine to idle for 20 minutes with product running through system. Then allow to cool for 20 minutes. Repeat this step until all symptoms are gone… Once completed, refill system with fresh coolant. See “Instructions Page” for complete informations.

Answer: Titan Sealers ® are the world’s only “polymer-based” sealers! All other brands like Blu-Devil, Bars, Themgasket, NanoTech, Steal Seal and others are simply “silicate-based”, all the same just different labels. What a joke… Those silicate-based sealers turn to glass once they cured and almost immediately start to crack away from aluminum cylinder heads. Titan’s “polymer-based” sealers are made for aluminum, stay flexible and simply cannot crack away…

Answer: YES! Titan Automotive Sealers really does work. Titan Automotive has been a leader in the automotive sealant industry since 1998. We have repaired well over 1/2 million vehicles world-wide and have been rated the #1 Sealer Manufacturer multiple times over the years by over 15 thousand mechanics in the USA… We’ve even received mentions and awards by several automotive TV shows and magazines.

Answer: Titan Sealers combine very advanced chemical Polymers, organic and inorganic com- pounds at trade-secret amounts to produce a “Flexible-Seal Product” which has the strength of steel yet the flexibility of polyethylene glycol polymers. When introduced to the coolant system it then travels to the head gasket area where with heat it bonds with the cracked gasket and cures.

Answer: Titan Head Gasket Sealers are custom formulated for your specific engine’s compression and running temperature (between head & block). This means, we formulate your sealer to ONLY cure between the cylinder head & block of your specific vehicle. So, there’s simply NO chance of curing or clogging other areas like heater-cores, radiators. It’s temperature specific… That’s smart!

Answer: With specific formulas like this its no wonder Titan has the highest success rate in the industry at 98% on the first application! Only about 2% of our customers require a second treatment to achieve a full seal. If you do need a second treatment, we have you covered. All our products offer an ironclad replacement warranty. If you need more sealer to fully repair your engine, just give us a call. We have you covered…